Die Rolling
MC-35 POWERBOX™ KINEROLLER™ Single Revolution Spline Roller

   Maximum Radial Die Load (kN)

1335   Center Distance Range (mm) 304-457
  Standard Spindle Diameter (mm) 76   Spindle Skew Range ( Degrees ) --
  Standard Die Gap (mm) 50   Standard Die Drive (kW) 25
  Die Diameter Range (mm) 203-406   Maximum Rolled O.D. (mm) 50

  The MC-35 is a single revolution POWERBOX™ KINEROLLER™ designed to roll splines,
  serrations and other forms on transmission shafts, motor shafts, actuator shafts, off road vehicle
  drive shafts, steering shafts and other shafts requiring precision rolling.  The MC-35 can also
  perform thread rolling, worm rolling and other unique rolled forms. The machine uses very little
  floor space when compared to other spline rolling process.  The dies are driven by servo
  motors allowing for easy numeric adjustment via the HMI.  The rugged stress frame of the
  MC-35 provides for a very stable rolling environment. 

  The MC-35 can be easily adapted with automatic loading to maximize production, or can be
  manually loaded for smaller production requirement. A KINESPIN™ centrifuge system is available
  as an option to clean and reclaim used coolant.


The above information to be used as guideline only. Final machine specifications
and capabilities will be determined by KINEFAC® Corporation based on specific applications.

For more information call us at 508-754-6891 or email us at